DeltaQuad Pro #MAP
The DeltaQuad Pro #MAP offers all the advantages of the DeltaQuad Pro and comes with a full integrated mapping mount for several types of high grade camera systems. The system is outfitted with a trigger mechanism and an easy to use removable mount compatible with the selected camera. A hardened glass window is installed to protect the camera from dust or damage during takeoff and landing.
The Ground Control Station offers state-of-the-art surveying options and can georeference the images in post processing. Based on the Pixhawk/PX4 flight system the DeltaQuad Pro #MAP support a variety of RTK and PPK solutions for centimeter level accuracy such as Emlid Reach. Another and easier method of achieving centimeter level accuracy is by using Ground Control Points (GCP) with stitching software capable of detecting these such as Pix4D.
The hardened glass window is sunken into the bottom of the payload bay. It is shielded from sunlight or glare and does not touch the ground when landed. The glass is removable and can easily be cleaned or replaced.
The DeltaQuad Simulator allows survey missions to be simulated, this allows precise tuning of the missions for optimal performance.
Note: Camera not included
✔ All features provided in the DeltaQuad Pro
✔ Automated trigger mechanism compatible with your selected camera.
✔ Removable EPP mount for stable holding and maximum protection of the camera payload.
✔ Hardened glass window for protection against water, dust and damage during takeoff and landing.
✔ Fully autonomous mapping missions from takeoff to landing
✔ RTK and PPK ready
✔ DeltaQuad Simulator included »
Currently the following cameras have been tested and approved for use with the DeltaQuad Pro #MAP;
Sony RX1R MK2
The Sony Cybershot DSC-RX1R mark II camera combined with the Carl Zeiss 35mm lens offers 42MP full frame sensor.
Sony A7R MK2/MK3
The Sony A7R mark III combined with the Sonnar T 35mm lens offers 42MP with even faster shutter speeds and a higher dynamic range.
The Sony A6000 24MP sensor with 16-50mm lens provides an affordable, high resolution mapping sensor.
The DeltaQuad Pro #MAP supports any camera/lens configuration that weighs up to 1Kg and maintains a lens to camera length below 90mm. If you require a mount and trigger mechanism for a different camera please contact us for a feasibility analysis.